Fronts

A model of fronts with a plain surface, whose simple form highlights the colour and texture. Pure can be combined with either the Push-Open opening system, Plankton handles from our offer or the ones of your own choice.

Lacquer finish: A front made of a certified 18 mm thick MDF board, covered with a covering matte varnish, finished with white laminate on the inside.

Natural veneer finish: A 19 mm front made of chipboard covered on both sides with approx. 1 mm thick natural veneer. Protected with colourless, matt varnish.

Stained veneer finish: A 22 mm thick front made of certified MDF board, covered on both sides with approx. 1 mm thick oak veneer. Protected with staining oil for wood colours or matt varnish for colours from the RAL and NCS palette.

A model of fronts with a milled, subtle frame in the form of intersecting lines on the outside. Classic can be combined with either the Push-Open opening system, Plankton handles from our offer, or handles of your own choice.

Lacquer finish: Front made of a certified 18 mm thick MDF board, covered with an opaque matte varnish, finished with white laminate on the inside.

A model of fronts with a sharply cut edge handle along its entire width, which can be positioned on the top or bottom edge.

Lacquer finish: Handle profiled from powder-coated aluminium in the colour of the fronts. The fronts are made of certified 18 mm thick MDF board covered with an opaque matte varnish, finished with white laminate on the inside.

Natural veneer finish: Handle milled into solid wood insert. The 22 mm thick front made of chipboard covered on both sides with natural veneer of approx. 1 mm thickness and secured with colourless, matt varnish.

Stained veneer finish: Handle milled into solid wood insert. Front 22 mm thick made of certified MDF board, covered on both sides with oak veneer approx. 1 mm thick. Protected with staining oil for wood colours or matt varnish for colours from the RAL and NCS palette.

A model of fronts with a structured surface of slim veneer strips, located along its length on the outside. The background for the stripes is naturally grained wood covered with stain in the colour of the finish. Stripe can be combined with either the Push-Open opening system, Plankton handles from our offer or handles of your own choice.

Natural veneer finish: 19 mm thick front made of blockboard covered with natural veneer on both sides, approx. 1 mm thick and secured with a colourless, matt varnish.

A model of fronts with a milled handle 15 or 55 cm long, which can be mounted on the top, bottom, or side edge of the front. The front version for the IKEA PAX wardrobe has a handle extended to the bottom edge.

Lacquer finish: Milled handle rounded on the edges in the shape of a boat. Front made of a 18 mm thick certified MDF board, covered with opaque matt lacquer, finished with white laminate on the inside.

Natural veneer finish: Handle milled into a solid wood insert in the shape of a rectangle. The front is 19 mm thick and made of chipboard covered on both sides with natural veneer of approx. 1 mm thickness and secured with a colourless, matt varnish.

A model of fronts with a structured surface of arc-shaped strips placed along its length on the outside. Wave can be combined with either the Push-Open opening system, Plankton handles from our offer or handles of your own choice.

Lacquer finish: Front made of a certified 22 mm thick MDF board, covered with an opaque matte varnish, finished with white laminate on the inside.

A model of fronts with a structure of arcs approximately 55 mm wide, arranged along the length on the outside. The pattern, distributed symmetrically from the centre, is milled into a 5 mm thick layer of wood.

Arch model can be combined with either the Push-Open opening system, the Plankton handles from our range, or handles of your own choice.

Stained veneer finish: 22 mm thick front made of a certified MDF board, covered on both sides with a layer of oak wood. Protected with staining oil for wood colours or matt varnish for colours from the RAL and NCS palette.

A model of fronts closed with a subtle frame made of solid wood, in the form of a convex quarter round with a width of 10 mm. The interior of the frame is available in two variants: plain surface or filled with a pattern in the form of half rounds, milled in a 5 mm thick layer of wood.

Hem model can be combined with either the Push-Open opening system, Plankton handles from our offer, or handles of your own choice.

Stained veneer finish: 22 mm thick front made of a certified MDF board, covered on both sides with a layer of oak wood. Protected with staining oil for wood colours or matt varnish for colours from the RAL and NCS palette.

A model of fronts with a structure of irregular embossing on its outer side. The pattern is milled in a 5 mm thick layer of wood.

Coral model can be combined with either the Push-Open opening system, Plankton handles from our offer, or handles of your own choice.

Stained veneer finish: 22 mm thick front made of a certified MDF board, covered on both sides with a layer of oak wood. Protected with staining oil for wood colours or matt varnish for colours from the RAL and NCS palette.