Panels and plinths

It is best to choose a panel in the standard size suggested by an IKEA consultant so that it can be cut to the required pieces on-site. As a result, you will avoid possible problems with dimensioning.

If you have a specific dimension in mind, you can take advantage of our configurator and select the appropriate dimension range.

If you have any doubts, it is worth asking a designer or an installer for help in determining the dimensions. You can also order panels from us after installing and measuring the kitchen.

We offer panels in standard widths of 62 cm and 39 cm, which can be cut as needed. The final panel width may depend on the assembly method, unevenness of the wall, or other elements.

The width of the panel results from the sum of the depth of the cabinets and the thickness of the front.

If you have any doubts, it is worth consulting a designer or installer or ordering panels from us after assembling and measuring the kitchen.

If you decide on a panel with a frame in the Hem model, remember that cutting will require interfering with the frame. Therefore, it is best to choose a panel in the target size.

In case of any doubts, it is worth asking a designer or installer for help or ordering panels after installing and measuring the kitchen.

By default, the side panels in our configurator are adjusted to the height that covers the feet with a height of 8 cm. However, you can choose a custom size shorter by 8 cm, which will only cover the body, or a higher panel if the plinths are more than 8 cm high.

If your kitchen furniture ends with household appliances that do not have a cabinet (washing machine or dishwasher), it is best to choose a full-height panel on which the countertop will rest.

The largest panel available is 70 cm wide and 248 cm high.

After cutting, the edge of a panel remains unfinished. Usually, such an edge is not visible, so its aesthetics should not be a problem. However, if you wish the edge to be finished, it is worth consulting with an installer who can suggest the manner of finishing. FRØPT does not offer finishing materials.

Panels can be used to finish a kitchen island, both on the side and on the back. The largest panel width available in our configurator is 70 cm. If you need a larger piece, you should order it in multiples. When designing side and rear panels, it is worth taking into account their thickness. If the back panels are to cover the sides, add the thickness of the side panels to the cabinet lengths. If the side panels are to cover the back, take into account the thickness of the back panels and fronts in the depth of the panels.

If you have any doubts as to the dimensions, it is worth asking a designer or installer for help or ordering panels after assembling and measuring the kitchen.

The depth of the masking panel should take into account the depth of the cabinet and the thickness of the fronts. If you are installing side panels, plan them to be longer enough to cover the panel masking the bottom of the cabinet, or vice versa, plan a longer masking panel so that it also covers the side panels.

You can install an LED strip in the panel. In such a case, we will prepare the panel in two parts, you will place the lighting between them. In the comment for the order, enter the width that each part should have so that we can adapt the panel to your needs.

If the panel masking the bottom of the hanging cabinets is to be finished with a cuverd panel, in the comment for the order enter which side of the cabinets will be rounded. Then you will receive a masking panel with a properly rounded end.

Yes, you can construct a piece of furniture to any size, just specify the size of each of its elements. Please note that the varnished fronts are finished with white laminate on the back, while the natural and dyed veneered fronts are covered with veneer on both sides.

The varnished dividers are finished with a white laminate, with a varnish fragment 10 cm from the edge. When planning to extend the panel in relation to the cabinet line, this difference in finish must be taken into account.

We offer single-sided curved panels in standard widths of 62 cm and 39 cm, which can be cut on your own. In the case of these panels, the width consists of 10 cm of the curved part and the corresponding part of a cover panel. The final depth of the panel may depend on the method of assembly, unevenness of the wall, or other elements.

The safest option is to choose a panel in a standard size. However, if you have specific requirements concerning dimensions, you can use our configurator by selecting the appropriate dimension in the range.

If you have any doubts, it is worth consulting a designer or installer or ordering panels from us after assembling and measuring the kitchen.

Panels curved on both sides include a curved element on both sides, which makes it impossible to cut them. To determine the dimensions, take into account the depth of the cabinets and the thickness of the fronts and possible back panels if you use them.

If you have any doubts as to the dimensions, it is worth asking a designer or installer for help or ordering panels after assembly and measuring the kitchen.

By default, the side panels in our configurator are adjusted to the height that covers the feet from the side of the cabinet. However, you can choose a custom size shorter by 8 cm, which will only cover the body, or a higher panel if the plinths are more than 8 cm high.

If your kitchen furniture ends with household appliances that do not include a cabinet (washing machine, dishwasher), select a curved panel with the full height of the furniture on which the countertop rests. 

It is best to consult an installer to make sure that installing the curved panel to the wall or floor is possible.

The largest dimension of a panel is the width of up to 80 cm for single-sided curved panels and up to 90 cm for panels curved on both sides. The height of a panel can be up to 248 cm.

After cutting, the edge of a panel remains unfinished. Usually, such an edge is not visible, so its aesthetics should not be a problem. However, if you want an aesthetic finish, it is worth consulting an installer who will suggest the proper manner of finishing. FRØPT does not offer finishing materials.

For the side of a kitchen island, it is possible to use a curved on both sides or two panels curved on one side if the island is deeper than 90 cm.

If you have any doubts, it is worth consulting a designer or installer or ordering panels from us after assembling and measuring the kitchen.

Yes, then enter in the comment in our configurator that this is a curved panel for a hanging cabinet so that we can make a cap of white laminate on the bottom of the panel. If you want an aesthetic finish, you can also order a rounded panel for the bottom of the hanging cabinets.

If you use panels masking the bottom of hanging cabinets ended with a curved panel, in the comment in our configurator, enter which side of the cabinets should be rounded.

In models including milling (Stripe, Wave, Coral, and Arch), both the straight and curved parts of the panel include milling. In the Hem model, the straight part has a decorative frame or a frame with a milled interior, whereas the cuverd part is smooth.